To process the diffraction images in your laboratory, please download the file def.site corresponding to the beamline of interest (where you collected the data). It is recommended that you generate a new directory under your $HKLDIR for the beamline, and put in there the file def.site.
Important!! We are operating a new detector EIGER X4M at BL-1A.
Important!! We are operating a new detector Pilatus3 S 6M at BL-17A.
Important!! HKL2000 obtains the direct beam position from a def.site file, NOT from the image header. Therefore, make sure that your def.site is new and has the correct direct beam position.
Download and execute a script file generate_XDS.INP(Ver.20151114), which is originally written by Dr. Kay Diederichs and modified for PF PX beamline's.
To process your data with Mosflm, you will need to download the appropriate init.mac, and edit the file with your experimental confitions before processing it. You can then run this macro file using the Mosflm command line by typing @init.mac.
Download the appropriate parameter file, and specify it in the main window of the DPS GUI.